English
Categories
Mount Accessories
There are 27 products.
NightSky Vibration Suppression Pad
0 Review(s)
Significantly dampen vibrations that reverberate through your telescope with the addition of these simple yet effective vibration suppression pads. Put one under each tripod foot (this set comes with 3), regardless of the material your telescope is sitting on. Works on dirt, wood, asphalt, concrete, grass, etc.
Sky-Watcher Power Adapter for GoTo Mount
0 Review(s)
12 volt DC 5A power supply There is a 2.1mm tip positive plug suited to many SkyWatcher and Celestron telescopes and mounts
Vixen Guide Mount XY
0 Review(s)
Ideal for the astrophotographer For Long-Exposure Astrophotography Adds Fine Adjustments to Guide Scope For up to 80mm Apertures
Vixen Stay On Case for Roof Binoculars L-type
0 Review(s)
Suitable for: New Foresta 10x50 ATREK 8x50 and 10x50 Old APEX Pro 10x50 ARTES ED8.5 and ED10.5 models
Sky-Watcher AZ-EQ6 Counterweight
0 Review(s)
5.1 kg counterweight for AZ-EQ6. Not compatible with EQ5/HEQ5/NEQ6
Vixen Porta Multi Plate
0 Review(s)
Adapts the dovetail connection on the Porta Allows you to place a spotting scope or binocular on the mount Made of Stainless Steel
Vixen Weight Shaft Camera Bracket
0 Review(s)
allows the attachment of a camera to the 20mm weight shaft found on Vixen GP and Sphinx mounts
Vixen SX Counterweight 1.9 KG-2577
0 Review(s)
Compatible with Sphinx, Great Polaris, Great Polaris 2, Great Polaris D2, Great Polaris Economy, Super Polaris and Super Polaris DX Mounts Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft Machined Steel Counterweights
Vixen SX 2.8 kg Counterweight
0 Review(s)
Machined Steel Counterweights Compatible with Sphinx, Great Polaris, Great Polaris 2, Great Polaris D2, Great Polaris Economy, Super Polaris and Super Polaris DX Mounts Bored with 20mm inner Diameter hole to fit 3/4"(19mm) shaft
Vixen SX Counterweight 3.7 KG
0 Review(s)
Machined Steel Counterweights Compatible with Sphinx, Great Polaris, Great Polaris 2, Great Polaris D2, Great Polaris Economy, Super Polaris and Super Polaris DX Mounts Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft Comes unboxed 4 x 4.5 x 3.5 inches