More items from this sellerView All

QHY 533C CMOS Camera

AED 3,530.00

0 reviews
  • Cooled CMOS camera with Back Side Illumintad technology with Sony sensor 533M/C in colorversion
  • Sensor format, square, 3003 x 3003 pixels
  • Sensor size 12, x 12.3 mm, diagonal 15.9 mm Pixel size 3.76 µm
  • Quantum efficiency over 90% at 450 nanometers (monochrome sensor)
  • Exposure times up to 3600 seconds
  • Full well capacity 58 ke-
  • Readout noise 1.3e- to 3.4 e-
  • Dark current 0.0005 e-/pixel/sec at – 20 degrees
  • AD conversion 14 bit
  • Interface USB 3 High Speed
  • Maximum frame rate 27 full frames at 8 bit and 18 full frames at 14 bit, ROI possible (depending on control computer)
  • Shutter rolling shutter
  • Large internal image memory with 1 GBy DDR3
  • 2-stage TE cooling, 35 degrees below ambient at exposure times > 1 second
  • With “Anti-Noise”, “Anti Amplfier Glow” and “AntiDew” technology
  • Diameter and length 90 x 107 mm (optimal for RASA and Hyperstar telescopes)
  • Backfocus at 17,5 millimeter
Lead time delivery: 14 - 30 days

Available on backorder

Description

With the advantage of low readout noise and high-speed readout, CMOS technology has revolutionized astronomical imaging.  The QHY533M/C is a new generation of back-illuminated CMOS cameras with 3.76um pixels.  The QHY533M/C uses the similar series of sensors as the flagship models QHY600 and QHY268, featuring low noise.

Features:

BSI

One benefit of the back-illuminated CMOS structure is improved full well capacity. This is particularly helpful for sensors with small pixels. In a typical front-illuminated sensor, photons from the target entering the photosensitive layer of the sensor must first pass through the metal wiring that is embedded just above the photosensitive layer. The wiring structure reflects some of the photons and reduces the efficiency of the sensor.

In the back- illuminated sensor the light is allowed to enter the photosensitive surface from the reverse side. In this case the sensor’s embedded wiring structure is below the photosensitive layer. As a result, more incoming photons strike the photosensitive layer and more electrons are generated and captured in the pixel well. This ratio of photon to electron production is called quantum efficiency. The higher the quantum efficiency the more efficient the sensor is at converting photons to electrons and hence the more sensitive the sensor is to capturing an image of something dim.

TRUE RAW Data

In the DSLR implementation there is a RAW image output, but typically it is not completely RAW.  Some evidence of noise reduction and hot pixel removal is still visible on close inspection.  This can have a negative effect on the image for astronomy such as the “star eater” effect.  However,  QHY Cameras offer TRUE RAW IMAGE OUTPUT and produces an image comprised of the original signal only, thereby maintaining the maximum flexibility for post-acquisition astronomical image processing programs and other scientific imaging applications.

Anti-Dew Technology

Based on almost 20-year cooled camera design experience, The QHY cooled camera has implemented the fully dew control solutions. The optic window has built-in dew heater and the chamber is protected from internal humidity condensation. An electric heating board for the chamber window can prevent the formation of dew and the sensor itself is kept dry with our silicon gel tube socket design for control of humidity within the sensor chamber.

Cooling

In addition to dual stage TE cooling, QHYCCD implements proprietary technology in hardware to control the dark current noise.

Design

QHY533M (mono) and 533C (color) have different interface designs to be more flexible to deal with different applications.

QHY533M can be directly connected to the QHYCFW3S-SR without removing any part of the filter wheel (like the filter container). This provides a very short back focal length and that’s easy to fix! Besides, QHY533M + QHYCFW3S-SR combination can be easily connected to a DSLR lens, with only one additional adapter (sold separately).  

Both QHY533M/C comes with an additional adapter for tripod interface. This makes it easier to shoot with DSLR lens.

QHY 533C/M CMOS Camera

Specifications

Model QHY533M QHY533C
COMS Sensor SONY IMX533 M SONY IMX533 C
Mono/Color Mono Color
FSI/BSI BSI
Pixel Size 3.76um x 3.76um
Effective Pixel Area 3008*3028 (includes the optically black area and overscan area)
Effective Pixels 9MP
Sensor Size 1 inch
A/D Sample Depth

 

Native 14-bit A/D
Full Well Capacity (1×1, 2×2, 3×3) 58ke-
Full Frame Rate USB3.0 Port:
Full Resolution  26.5FPS  @8BIT         20FPS @16BIT2160Lines          37FPS     @8BIT          28.5FPS@16BIT1080Lines          71.5FPS   @8BIT          55FPS @16BIT768Lines             97FPS      @8BIT          76FPS @16BIT480Lines             152FPS    @8BIT          117FPS @16BIT240Lines             280FPS    @8BIT         215FPS@16BIT
Readout Noise 1.3 to 3.4e-
Dark Current -20C,0.0005e- /pixel/sec
Exposure Time Range 30us-3600sec
Unity Gain 68
Shutter Type Electronic Shutter
Computer Interface USB3.0
Built-in Image Buffer 1GByte DDR3 Memory
Cooling System Two-stage TEC cooler

Less than 1S lower than ambient temperature -30C in continuous mode

More than 1S continuous mode or lower than ambient temperature -35C in single frame mode

(Test temperature +20°)

Optic Window Type AR+AR High Quality Multi-Layer Anti-Reflection Coating
Anti-Dew Heater Yes
Telescope Interface Support M48 (with adapter)
Back Focal Length Actual Back Focal Consumed: 14 mm (Combined with CFW)

Standard BFL: 17.5mm(±0.5)

17mm
Weight 845g 845g

 

0.0 Average Rating Rated (0 Reviews)

Rated
0%
Rated
0%
Rated
0%
Rated
0%
Rated
0%

Be the first to review “QHY 533C CMOS Camera”

Your email address will not be published. Required fields are marked *

You have to login to add images.